Looking for the Best Car Amplifier For Competition available to buy right now on Amazon but don’t want to have to do all the research on the pros and cons of the different types of Car Amplifier For Competition?
Pop Expert have put together this list of the top 10 selling Car Amplifier For Competition on Amazon – sorted by overall popularity and positive consumer reviews.
The Pop Expert list of top selling Car Amplifier For Competition is the ideal place to start when you are trying to find the Best Car Amplifier For Competition for your neeeds.
Popular Car Amplifier For Competition on Amazon
Details on the Best Car Amplifier For Competition
- Features: Rockville dBcomp4 Competition Mono Amplifier 3000w RMS Dyno-Certified! Car Audio Amp.
- Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 1 Ohm: 3000 Watts x 1 Channel <1% THD+N at 14.4 volts (83% efficiency). 2 Ohm: 2000 Watts x 1 Channel <1% THD+N at 14.4 volts (80% efficiency). Digital voltage display on amp.
- External 400A fuse. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Fully Adjustable 24dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch. Limiter With ON/OFF Switch (You can turn off the limiter if you want to burp a sub during a competition and get more power out of the amp).
- Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. RCA Preamp Line Output. 8 Volt Preamp Circuitry. Power/Protect/Clip LED Indicators on control panel. Power/Protect/Clip LED Indicators on Remote control. Minimum THD at Rated Power: <0.1%. S / N Ratio: >90dB. Under Voltage Protection at 10V.
- Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. Dimensions: (W x H x L) 9" x 2.4" x 23"
- Competition Grade SPL Class D Monoblock MOSFET Car Power Amplifier
- Peak Power at 1 Ohm: 2,200 Watts | RMS Power at 1 Ohm: 1,500 Watts
- Stable at 1 Ohm, Frequency Response: 15Hz - 270Hz
- Featuring 4-Way Protection Circuitry and 1/0 Gauge Power & Ground Input Terminals for Maximum Current Flow
- User Adjustable Low Pass Filter (Variable): 35Hz - 250Hz, Remote Subwoofer Level Control Included
- ORION HIGH PERFORMANCE AMPLIFIER: Serious amounts of power driving ridiculously low impedances at completely sick output levels is what the HCCA Series is all about. Whether you're looking for an SPL world record or you just want to do some serious damage on the streets, these amplifiers will ensure they hear you before they see you. Hellacious power intersects with extreme efficiency under rugged die-cast aluminum covers with illuminated ORION badges that tell the world that HCCA is back!
- FEATURES: Experience the ultimate in sound clarity and maximum protection to keep your audio system running safely and smoothly with the advanced features the HCCA3000.1DSPLX delivers. The Fault and Protection monitoring with the MOSFET Power Supply provides superior performance while providing the protection needed in your system. The Low Pass Filter is another great feature that lets you tone your subwoofers to the ideal sound to experience smoother frequency transition.
- SPECS: The HCCA3000.1DSPLX delivers world-class high-performance audio to your vehicle audio system. With its flexible crossover options and bass boost controls, this amplifier is sure to bring out the best in any music you play. The HCCA3000.1DSPLX has a frequency response of 20Hz - 250Hz, with a Low Pass Filter of 40Hz - 300Hz to bring those subwoofers to the extreme levels of low bass frequencies.
- EXTREME POWER: The Orion HCCA3000.1DSPLX has been specially engineered for those looking for extreme power with 13,000W Max Power / 5000W RMS. Whether you’re just an audio enthusiast or a record breaker this amplifier ensures you will be heard!
- DIMENSIONS: 18.9” x 11.8” x 3.0” (480.06mm x 299.72mm x 76.2mm)
- 4 channel amplifier car audio rated 190W @ 2-ohm load x 4-ch (13.2v); 125W @ 4-ohm x 4-ch (13.2v); 400W @ 4-ohm bridged x 2-ch (13.2v)
- Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4-channel car amplifier delivers the power you need to destroy the competition in the SPL lanes
- LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads
- Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the car amplifier runs cool for even the most demanding playlists
- Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry; sleep easy at night knowing your 4ch car audio amplifier is protected
- 2000W Total RMS
- Frequency Response: 10 - 300 Hz
- Soft start turn-on
- Pulse Width Modulated MOSFET power supply
- Dimensions: 6.5"W x 8.75"L x 2.5"H
Newest Car Amplifier For Competition
- This bundle includes 2x Alpine SPV-65RGB-CAN 6.5” Speaker Pods, 1x Alpine KTA-30FW Power Pack Amplifier, and 1x Clarion CMR-L1 Marine LED Light Controller.
- Enjoy Alpine Signature Sound performance with marine-grade, weather-resistant speaker pods that outperform the competition.
- Stand out with customizable RGB lighting on the speaker pods for a personalized look.
- The compact Alpine KTA-30FW amplifier delivers high output power and increased dynamic range for open cab vehicles.
- The Clarion CMR-L1 LED light controller offers dynamic modes, direct preset colors, and a wide operating voltage range.
- Elevate your competition game and leave competitors in awe with the American Bass VFL Competition Subwoofer.
- Features a 4" voice coil, 550 ounces magnet, and high roll surround for commanding bass.
- Pristine carbon fiber paperback cone ensures impressive highs and perfect sound clarity.
- Tailored for serious car audio competitors seeking the loudest and clearest audio experience.
- Elevate your competition game and leave competitors in awe with the American Bass VFL Competition Subwoofer.
- 2" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers
- PEAK POWER HANDLING - At 800W Max and 400W RMS the PRO-D2 compression driver boasts out-of-this-world power handling for a Pro audio sound you will love.
- HIGH-QUALITY MAGNETS - Settle for nothing but the best with a 65 oz Ferrite magnet that produces a wider range of tones and can handle tremendous power at high volumes.
- HORN COMPATIBILITY - The PRO-D2 is compatible with DS18's PRO-HA100 aluminum horns. You can customize your system with 7 colors to choose from.
- DURABLE & LONG LASTING PERFORMANCE - this compression driver doesn’t draw an excessive amount of power from your amplifier & ensures long-lasting performance from your equipment.
- 3" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, Kapton voice coil and a ferrite magnet make these the best drivers available.
- PEAK POWER HANDLING - At 680 Max and 340W RMS the PRO-DRN2 compression driver boasts out-of-this-world power handling for a Pro audio sound you will love.
- HIGH-QUALITY MAGNETS - Settle for nothing but the best with a 38oz Ferrite magnet that produces a wider range of tones and can handle tremendous power at high volumes
- 8 OHM IMPEDANCE: This car tweeter has 3” flat aluminum voice coil, 106 dB SPL and 8ohm impedance rating that compensates the undersized wire found in most cars. It ultimately reduces distortion so you can enjoy a crisp and clear sound
- DURABLE & LONG LASTING PERFORMANCE - this compression driver doesn’t draw an excessive amount of power from your amplifier & ensures long-lasting performance from your equipment.
- 1.35" COMPETITION COMPRESSION DRIVER - These are the epitome of competition-quality compression drivers. Titanium diaphragm, Kapton voice coil and a ferrite magnet make these the best drivers available.
- PEAK POWER HANDLING - At 400W Max and 200W RMS the PRO-DR1.35 compression driver boasts out-of-this-world power handling for a Pro audio sound you will love.
- HIGH-QUALITY MAGNETS - Settle for nothing but the best with a 16 oz Ferrite magnet that produces a wider range of tones and can handle tremendous power at high volumes.
- USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 1" (25.4mm) TPI threading, which allows it to work as a replacement driver for many popular horns.
- DURABLE & LONG LASTING PERFORMANCE - this compression driver doesn’t draw an excessive amount of power from your amplifier & ensures long-lasting performance from your equipment.