Looking for the Best Ide To Sata Adapters available to buy right now on Amazon but don’t want to have to do all the research on the pros and cons of the different types of Ide To Sata Adapters?
Pop Expert have put together this list of the top 10 selling Ide To Sata Adapters on Amazon – sorted by overall popularity and positive consumer reviews.
The Pop Expert list of top selling Ide To Sata Adapters is the ideal place to start when you are trying to find the Best Ide To Sata Adapters for your neeeds.
Popular Ide To Sata Adapters on Amazon
Details on the Best Ide To Sata Adapters
Bestseller No. 1
Kingwin SSD/SATA to IDE Bridge Board Adapter, Convert All SATA Devices Easily to IDE. Support 2.5 Inch, 3.5 Inch HDD, & Compatible w/ SATA I/II/III Hard Drives
- Convert all SATA devices to IDE
- Data transfer rate up to 3.0 Gbps
- Two LED indicators for "power on" (green) and "HDD" (red)
On Sale!Bestseller No. 2
StarTech.com IDE to SATA Hard Drive or Optical Drive Adapter Converter - 40-Pin PATA to 2.5" SATA HDD / SSD / ODD Converter (IDE2SAT2)
- Connect a SATA device to an IDE/ATA motherboard or controller card
- Complete hardware solution; no software required
- Support for 48-bit Logical Block Addressing (LBA)
- Compliant with SATA revision 1.0 specification
- Supports SATA I/II/III (1.5/3/6Gbps) drives
Bestseller No. 3
NFHK SATA Disk to IDE/PATA 40Pin Motherboard Converter Adapter PCBA for Desktop & 2.5 3.5" Hard Disk Drive
- 3.5 inch SATA HDD Drive to IDE 40Pin mainboard converter Board
- Works with all 2.5/3.5" SATA Drives.
- Supports IDE 66/100/133MB/s
- With Master and slave jumper.
- No driver needed, plug and play, unit is not hot swappable.
Bestseller No. 4
CY IDE/PATA 40Pin Disk to SATA Female Adapter PCBA Converter for Desktop & 3.5" Hard Disk Drive
- for Desktop & 3.5" Hard Disk Drive , Works with all IDE 40Pin Drives up to 1000GB
- Supports IDE 66/100/133MB/s . Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD.
- No need for an extra power supply.
- No driver needed, plug and play, unit is not hot swappable. Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux.
- 3.5 inch IDE/PATA 40Pin HDD Drive to SATA Female Converter Adapter PCBA
Bestseller No. 5
Cablecc IDE/PATA 40Pin Disk to SATA Female Converter Adapter PCBA for Desktop & 3.5" Hard Disk Drive
- 3.5 inch IDE 40Pin HDD Drive to SATA converter Board Works with all IDE 40Pin Drives up to 1000GB
- Supports IDE 66/100/133MB/s No need for an extra power supply.
- No driver needed, plug and play, unit is not hot swappable.
- Adapter is good for up grading an old computer with 3.5 inch IDE HDD to a new 3.5 inch SATA HDD or SSD.
- Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux.
Newest Ide To Sata Adapters
New
GIUIN USB 2.0 to IDE SATA S-ATA 2.5/3.5 inch Adapter for HDD/SSD Laptop Hard Disk Drive Converter Cable
- The product transmission interface uses a very stable USB2.0 interface and is down compatible with USB1.0.
- Dual USB interface power supply, without an external power supply, can support a high speed hard disk with a speed of 7200rp.
- The 2.5 inch SATA hard disk is connected to the computer, and the function of the hard disk box is easily set up.
- 30cm USB 2.0 to SATA 2.5/3.5 inch SSD Hard Disk Drive Adapter Converter for Desktop Laptop
- Support 2.5 inch SATA1 & SATA2 hard disk. It is small, plug and play, easy to carry.
New
LinaLife SATA PATA IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5" with External AC Power Adapter
- An essential toolkit for data transfer, backup and cloning. The high-speed USB interface provides easy plug-and-play installation. Lightweight, lowest cost mobile storage solution.
- At the same time compatible with USB 2.0 and USB1.1 plug and play. Up to 480Mb/s high-speed data transfer rate and 52 times the writing speed.
- Turn any SATA/IDE drive into a convenient external drive, which can be used as a bridge SATA hard disk, 2.5"" hard disk, 3.5"" hard disk, CD-ROM, DVD-ROM, CD-RW, COMBO device, DVD-RW to a computer with a USB 2.0 interface.
- Support IDE, enhanced IDE and SATA hard drives. Support installation of SATA hard disk, 2.5"" hard disk, 3.5"" hard disk, CD-ROM, DVD- ROM, CD-RW, COMBO device, external DVD-RW.
- Cable Length 3 feet 3 connectors: 1 IDE 44 Pin connector for internal 2.5-inch HDD; 1 IDE 40 for internal CDRW, DVDRW, CD Rom, DVD Rom, 3.5-inch hard disk, combination drive, etc.; 1 for SATA The SATA connector of the device. External AC power (not included) input 90v-264v needs to be used to supply power to the SATA/IDE device.
New
WALNUTA Dual Bay USB 3.0 to SATA IDE External Hard Drive Docking Station with 2-Port Hub Card Reader 2.5/3.5 Inch SATA/IDE HDD
- Model: 2-bay USB 3.0 to SATA/IDE HDD Docking Station
- Material: Aluminum + ABS
- Internal interface: SATA, 2.5" IDE, 3.5" IDE (with adjustable power switch)
- External interface: USB 3.0 5Gbps data transfer
- Other interface: 2x USB 3.0 hub, 1x TF card slot, 1x SD card slot
New
WALNUTA 2.5"/3.5" USB 3.0 to 2 SATA 1 IDE Port External HDD Hard Drive Disk Docking Station Card Reader USB3.0 Hub OTB/OTC
- It features 5 slots for multiple memory cards, up to 32G cards supported, easy and quick access to multimedia files.
- LED indicator shows the read and write status of hard disk and power supply, clear and convenient.
- Easily and quickly transfer files from to PC or card readers, all-in-one HDD docking with one touch backup(OTB) and one touch cloning(OTC).
- Super speed hard disk cloning(for all hard disk data) without driver required, plug and play.
- Supports 2.5"/3.5" dual SATA and IDE hard drives simultaneously.
New
IDE Hard Drive Card Easy to Install High Transmission Efficiency Supports IDE 66/100/133MB/s
- Laptop IDE Adaptor Card: SATA hard disk can be detected and used as a standard 2.5'' IDE hard disk. Convert all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD to 2.5" IDE device.
- Connection Design: Allows connection of a 7+15P SATA hard drive to a 44P IDE connector. 7+15 pin female chassis design allows direct connection to SATA hard drives without cables.
- How to Use: One SATA 7+15P female connector for connecting SATA hard drives. One IDE 44P male connector for connecting to a 44P IDE connector.
- Design Details: Compliant with version 1.0 of the Serial ATA specification. Supports Serial ATA data transfer rates up to 1.5Gb/s (150MB/s). Easy to install, no driver required. Super compact design with no wasted space.
- Compatibility: Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 and Linux.