Looking for the Best Laminate Cutter available to buy right now on Amazon but don’t want to have to do all the research on the pros and cons of the different types of Laminate Cutter?
Pop Expert have put together this list of the top 10 selling Laminate Cutter on Amazon – sorted by overall popularity and positive consumer reviews.
The Pop Expert list of top selling Laminate Cutter is the ideal place to start when you are trying to find the Best Laminate Cutter for your neeeds.
Popular Laminate Cutter on Amazon
Details on the Best Laminate Cutter
- Product Type : Tools
- Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank , Cemplank ), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick
- Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And Smooth Finish
- Sturdy High-Quality Steel And Aluminum Construction
- The blade of our LVT-330 cutters can be moved. There are many complex scenes on the construction site that need special cutting (irregular corners,most of which are columns, door edges and wall corners). It can help you finish your work smoothly. Be sure to buy one of the good things and try it, not to mention the beautiful price, which will save you a lot of time!ring),Laminate,Engineered floor or hard plank.Please refer to the seventh picture on the left.
- Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor.
- Replacement blade can be got at the online official brand store (MANTISTOL).
- Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.If you want to cut it,Each cut can only cut 1/16 inch, which is equal to that each cut is the upper surface of the floor. (requires some skills and control your strength)
- 13" cutting width and 8mm cutting depth. Straight cut, Angle cut; " L & 凵" cut, Rip cut and more. Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
- The MARSHALLTOWN Ultra-Lite Flooring Cutter 13" is essential for your next vinyl, laminate, or engineered hardwood flooring installation
- Cuts products up to 13" wide, 12 mm thick, and a Janka hardness of 1200
- At 14 pounds, this handy shear allows you to cut where you work without dust, noise, or electricity
- Unique features include a movable aluminum fence for precise, repeatable 45-degree cuts, 90-degree cuts, and an integrated handle for easy, single hand carry
- This product is proudly made in the USA with global materials
- For Laminate, Multi-Floor, Bamboo flooring, Parquet, solid wood, Deck-Floor-Boards, fiber-cement siding, rubber cove base, LVT, VCT, SPC, LVP, WPC, Vinyl Flooring and more, up to 13” wide and 16mm ( 5/8”) thick.
- Sturdy high-quality steel and Heavy duty aluminum construction. 4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp. Installation Kit with Tapping Block, Pull Bar and Spacers (With 20 Spacers)
- If you use it for business purposes, make sure you have a replacement blade. The general floor width is 8 inches, and only about half of the blade is used for each cut. When this side of the blade becomes dull, the floor can be moved to the other side of the workbench and work with the other half of the sharp blade, a complete double Supported worktable provides smooth, wobble-free and quiet cutting.This configuration, this price on the market, and it is a great value for money!
- 37-1/4" Handle for increased leverage with less effort. No electricity, no dust, quick, quiet and Easy to use. Item Weight 18.7 lbs, DIY For Household and Business, Strong and Durable, Preferred for business!
- Blades are consumables. If the whole cutter is damaged due to improper operation, it will not be covered by the one-year warranty.
- Cutting width 15/32~ 4-21/64-in, cutting depth 0~5/64-In, weight 2.65 lbs.
- Place your material into the fence provided and have the cutter run along the edge of the panel.
- Two opposing steel-made circular cutting blades mounted on roller bearings trace the cutting line.
- Knob on the tool top sets cutting thickness, adjust the strip width by using the scale provided.
- Loosen and tighten lock knob when reaching the desired cutting width.
Newest Laminate Cutter
- 【Multiple Cutting Materials】 This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick
- 【Sturdy Aluminum and Sharp Tungsten Steel Blade】 ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother
- 【Safe and Extra Accessories】 A chain to keep you safe while not using the laminate floor cutter. The graduated scale with metric and imperial scale can meet your need for different cutting, and you can choose the angles of 22.5°, 30°, and 45°
- 【Curved Knee Pads】The curved soft kneepads can dutifully wrap your knee and give you all-around protection. Allowing you to move freely through a variety of complex terrain
- 【Non-slip and protective】The textured abrasion-resistant surface of the knee pad prevents you from getting hurt on wet or slippery
- 【Multiple Cutting Materials】 This floor cutter can cut laminate floor, vinyl plank, multi-layer flooring, wood panels, parquet, fiber cement wall panels, rubber concave base, LVT, VCT, SPC, LVP, WPC. Floor cutting up to 13” wide and 5/8” thick
- 【Sturdy Aluminum and Sharp Tungsten Steel Blade】 ABS material cutting table and aluminum construction make the vinyl floor cutter strong and durable. With the sharp tungsten steel blade, it can cut faster and smoother
- 【Safe and Extra Accessories】 A chain to keep you safe while not using the laminate floor cutter. The graduated scale with metric and imperial scale can meet your need for different cutting, and you can choose the angles of 22.5°, 30°, and 45°
- 【GET RID OF MESSY TOOLBOX】The magnetic tool holder keep your tools and other metal objects organized and in one place. The magnetic bar takes very little space, and using it will help you get rid of messy toolbox, easily hold your wrenches, screwdrivers, spanners and keep them organized.
- 【MAGNETIC TOOL HOLDERS】 12 inch heavy duty tool holder bars with strong magnet, each bar can hold about 22 lbs. For having a larger weight capacity, you can install multiple magnetic tool bars side by side. Our magnetic tool bar is made of premium alloy steel, which guarantees magnetic tool organizer is sturdy and durable.
- The aluminum frame is lightweight and easy to carry
- Cuts laminate up to 8-Inch wide and 10mm thick
- Positionable-InchV-Inch support keeps planks level while cutting
- This product is meant to cut with leverage and not a sharp blade
- It is a blunt blade design that "rips" through the flooring material
- Tile chamfering frame-- the chamfer frame fits very perfectly with the ceramic tile angle, cut bricks without breaking edges.
- Stainless steel tile chamfer frame-- efficient and accurate, practical tile cutter chamfer frame can help to finishing the chamfering work easily and quickly.
- Tile cutter device-- can cut floor and wall tiles, such as ceramic marble, with a proper cutting thickness, this tile chamfer offers you good service.
- Tile tools-- portable construction, cushioned side bars support larger tiles and non-slip rubber surface designed to make cutting easier.
- Tile chamfer-- manufactured with premium stainless steel material, chamfer frame for tile is durable and practical enough to use.
- This versatile, light-duty cutter can make ultra-quick, dust-free cuts on a wide variety of products including laminate, engineered wood and luxury vinyl tile up to 340mm/13" wide and 12mm thick
- A long-lasting working life and a sharp 2.2 mm thick high speed steel blade, which can be sharpened and replaced, provides an easy and clean-edge cutting on floor planks
- The 340 will Make precise cuts at 45°, 30°,22.5° and 15° etched table miter gauge for angled cuts , and 2-Position aluminum fenceto allow for angle compensation
- At 17 pounds, work where you want with the integrated handle for easy, single hand carry
- Cut anytime day or night,No electricity, No dust, quick, quiet and Easy to use, environmentally friendly